We have created hundreds of patterns and instruction sheets and have at least three pairs of eyes going over our materials multiple times before sending them out into the world. We are grateful to the quilters and shop owners who have called with questions and apologize for the following updates. Click the appropriate highlighted link to download and print a PDF.
There is a new Part 3 Fabric H cutting diagram -- that fabric is now 24 inches long -- if your pattern does not have 24 inches in the cutting diagram, download the PDF to print and file with your pattern.
If you purchased Template Set Q prior to 2011, there is an error in the Satin Bow diagram on page 26. Please download and print this PDF, trim the image to size and tape over the one in your booklet. Where it says 8" x 3" cut on the second row, it should say 5 1/2" x 3" cut. In this case, pieces would be cut too large and could be trimmed down.
In a recent printing, the Kaleido-Ruler pattern on page 30 was not printed full size. If your instruction book does not have the notation "8158-1210" on the upper right back cover, please download this PDF and replace page 30. If you are using the Kaleido-Ruler itself, the PDF is not necessary.
We have added a missing border fabric to page 18 and corrected a cutting measurement on page 21. You can download a PDF of the 2 corrected pages here.
Our thanks goes out to the Club shop that recently called to alert us that the full size patterns on page 30 of Lazy Afternoon #8502 are a smidge too big. If you are using Template Sets A and B to cut your Lazy Afternoon project(s), you are all set, but you will probably want to update your pattern. We have made the correction and uploaded a PDF that you can download and print to add to your existing inventory. Patterns shipped to stores with Marti and Me Clubs after 5/30/12 have been updated and do not need the PDF.
Please note! When you print the corrected full size pattern pieces, be sure to check your printer specs before printing. Page scaling must be set to "zero". If your printer wants a percentage number, it's 100. If your printer defaults to "fit [or shrink] to printable area", deselect that option. Otherwise the full size patterns will not print at actual size.
Hole in the Wall has a change to Fabric C (8 1/2 square rather than 8" x 11") and addition of 98y full size pattern to help with Fabric C cutting.
Shutterbug also has the same change to fabric C cutting and the addition of 98y.
Printed December 2006, pages 30 and 31: The Set M template key diagrams should be keyed for square 75, not square 70.